Part Number
Part Number:
NSN:
NIIN:
Item Name:
CAPACITOR , FIXED , CERAMIC DIELECTR
Definition:
A CAPACITOR, WHOSE CAPACITANCE VALUE CANNOT BE ADJUSTED OR VARIED, HAVING A CERAMIC DIELECTRIC. IT MAY BE A SINGLE UNIT, OR CONSIST OF TWO OR MORE FIXED UNITS WHICH CANNOT BE SEPARATED.
CAGE Information
| Code | Company |
|---|---|
| 52763 | STETTNER ELECTRONICS INC |
Federal Supply Class
Title
CAPACITORS
Inclusions:
INCLUDES INTERFERENCE FILTER CAPACITORS; CAPACITOR MOUNTING HARDWARE.
Exclusions:
EXCLUDES SEMICONDUCTOR DEVICES AND ASSOCIATED HARDWARE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 63.0 DC SINGLE SECTION |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.0015 |
| CRTP | TOLERANCE RANGE PER SECTION | -5.00/+5.00 PERCENT SINGLE SECTION |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0/+30.0 SINGLE SECTION |
| AEBT | TERMINAL DIAMETER | 0.023 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.082 INCHES NOMINAL |
| ABJT | TERMINAL LENGTH | 0.984 INCHES NOMINAL |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 1000000000.0 MEGOHMS |
| CQBQ | CAPACITANCE VALUE PER SECTION | 47.000 PICOFARADS SINGLE SECTION |
| ADAT | BODY WIDTH | 0.255 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAQL | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| AGAV | END ITEM IDENTIFICATION | 6625-01-136-8602 SYNTHESIZER,ELECTRICAL FREQUENCY |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| ABKW | OVERALL HEIGHT (NON-CORE) | 0.082 INCHES NOMINAL |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| ADAQ | BODY LENGTH | 0.216 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| ABMK | OVERALL WIDTH (NON-CORE) | 0.255 INCHES MAXIMUM |
| CWJK | CASE MATERIAL | PLASTIC |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.200 INCHES NOMINAL |
| ABHP | OVERALL LENGTH (NON-CORE) | 0.216 INCHES MAXIMUM |